3
Within 30 seconds, press and hold the PAIRING
button on the rear panel of the subwoofer at least
three seconds.
Once the center unit and subwoofer have been paired
and a wireless connection established, the
*
indicator
will glow, and the center unit and subwoofer turn on.
PAIRING button
indicator
*
If the
*
indicator on the subwoofer does not glow after following the
procedure described here, see “No sound is coming from the
subwoofer” (p.56).
Initializing the unit
Reset the settings of the unit to the factory presets.
1
Turn off the unit.
2
Touch and hold
|
and
z
/CONNECT on the unit
until all indicators flash.
Flash (initialized)
Connecting to a network using the WAC
function
When the unit is turned on for the first time after purchase, the
*
indicator on the center unit flashes slowly. While the
*
indicator is
flashing, network settings from your iOS device (an iPhone, etc.)
can be applied to the unit to connect the unit to a wireless network
(WAC function).
NOTE
The
*
indicator does not flash if the unit’s NETWORK jack is connected to a router
using a cable (wired connection).
En
50
