Useful features for playback
Using a TV’s remote control to operate
the unit (HDMI control)
The HDMI control function coordinates TV and unit operation so that
the unit can be operated using the TV’s remote control.
When the unit is connected to a TV via HDMI cable, the TV’s remote
control can be used to perform the following operations.
Operations that can be controlled via the TV’s remote control
a
b
c
d
1
Turn on/off
Both the TV and the unit turn on/off at the same time.
2
Switch input sources
The unit's input source switches accordingly when the TV’s input
source is switched.
For example, when a TV program is selected on the TV, the unit’s audio
input source is switched to the HDMI OUT (ARC) jack using the ARC
function or TV input jack.
And also, when a BD/DVD player is connected to the HDMI IN jack on
the unit, the unit’s input source switches to HDMI when the BD/DVD
player is selected with the TV’s remote control.
3
Switch the audio output device
You can switch the audio output device to the TV or the unit.
4
Adjust volume
The unit’s volume can be adjusted when the TV’s audio output is set to
the unit.
NOTE
▪ If you are unable to operate the unit with your TV’s remote control, configure the
HDMI control function of your TV and the unit. For details, see the following:
– “Configuring the HDMI control function” (p.35)
▪ The input source can be switched while the unit is off (HDMI signal pass-through).
▪ The volume displays on the TV and unit may not be the same.
En
32
Showing audio information with
playback
The type of audio signal being played, whether Dolby Pro Logic II is
enabled or disabled, and bass extension and clear voice settings
can be confirmed by the status of indicators.
1
Press INFO on the remote control.
The indicators on the unit will show the following audio
information for three seconds immediately after INFO is
pressed.
a
b
c
d
1
Show the type of audio signal.
HDMI glows (white): Dolby Digital
HDMI glows (red): DTS
TV glows (white): AAC
HDMI and TV off: PCM/analog input/no input
2
Show whether Dolby Pro Logic II is enabled or disabled. Dolby Pro
Logic II is enabled automatically when 2-channel stereo signals are
played in surround sound.
Glows: Enabled
Off: Disabled
3
Show the bass extension function setting.
Glows: Enabled
Off: Disabled
4
Show the clear voice function setting.
Glows: Enabled
Off: Disabled
En
33
