Yamaha Arius YDP-105, Руководство пользователя

Страница: 16 / 24

16
YDP-105 Owner’s Manual
Keyboard Stand Assembly
CAUTION
• Assemble the instrument using at least two people.
• Assemble the instrument on a hard and flat floor with ample
space.
• Be sure to use the correct parts in the correct orientation,
and assemble the instrument in accordance with the
sequence given here.
• Keep small parts (such as screws) out of the reach of
infants. Children may accidentally swallow them.
• Be sure to use only the included screws of specified sizes.
Use of any other screws can cause damage or malfunction
of the product.
• To disassemble the unit, reverse the assembly sequence
given here.
You can watch a video of the assembly.
Check if you have all of the items indicated below.
NOTICE
Make sure to place the main unit on the polystyrene foam
pads that have been removed from the packages. Position the
pads so that they will not contact the speaker covers on the
bottom of the main unit.
* The adaptor may not be included, or may look different from the
illustration above, depending on your particular area.
Assembly Precautions
Have a Phillips-head (+) screwdriver of the appropriate size
ready.
Post-assembly checklist
• There are no unused parts.
• The instrument is stable even if you shake it.
• The pedal adjuster is firmly pressed against to the floor
surface.
• Both the pedal cord and power cord are plugged
securely into the correct jacks.
→ If there are any items above you haven’t confirmed,
review the assembly procedure and correct any errors.
Assembly
Scan the QR code at left or access the
website below.
https://4wrd.it/ydp_assembly_video3
× 4
× 4
× 2
× 4
Cord holder
Speaker cover Speaker cover Polystyrene foam pads
Main unit
Back board
Pedal box
Side board (L) Side board (R)
Flat head screws (6 × 20 mm) Thin screws (4 × 12 mm)
Tapping screws (4 × 20 mm)
Thick screws (6 × 16 mm)
AC adaptor