15
En
TROUBLESHOOTING
ADDITIONAL
IN
FO
RMATION
Engli
s
h
■
Universal Dock for iPod and Wireless System for iPod
Using the BASS,
TREBLE, BALANCE
and LOUDNESS
controls does not
affect the tonal quality.
The PURE DIRECT switch is turned on.
The PURE DIRECT switch must be turned off to use
those controls.
Problems
Possible Causes
Solutions
Refer to
page
No sound.
You cannot operate
the iPhone/iPod.
There is a problem with the signal path
from your iPhone/iPod to the unit.
Turn off the unit and reconnect the Universal Dock
for iPod or the Wireless System for iPod to the
DOCK jack of the unit.
Remove your iPhone/iPod from the Universal Dock
for iPod or the Wireless System for iPod and then
place it back in the dock.
The iPhone/iPod being used is not
supported by the unit.
Connect an iPhone/iPod supported by the unit.
When using a
Wireless System for
iPod:
Sound frequently cuts
out.
Noise is heard.
The wireless connection is poor.
Place the YID-W10 receiver as far away from this
unit as possible.
When using the
Universal Dock for
iPod:
Your iPhone/iPod is
not being charged
even though it is
connected to the
Universal Dock for
iPod.
This unit is not turned on.
Turn on this unit or set it to standby mode.
The iPhone/iPod is not connected
securely.
Connect the iPhone/iPod securely to the Universal
Dock for iPod.
When using the
Wireless System for
iPod:
Your iPhone/iPod is
not being charged
even though the YID-
W10 transmitter
connected to your
iPhone/iPod is
stationed in the YID-
W10 receiver.
This unit is not turned on.
Turn on this unit or set it to standby mode.
The YID-W10 transmitter is not stationed
securely in the YID-W10 receiver.
Station the YID-W10 transmitter connected to your
iPhone/iPod securely in the YID-W10 receiver.
Problems
Possible Causes
Solutions
Refer to
page
