Creating Plug-in Custom Voices
Creating Plug-in Custom Voices
106
Reference
Voice Editing on a Computer
You can edit Board Custom Voices and Native System Parameters from your computer,
using special plug-in software for the XGworks (or XGworks lite) program.
1
Connect your personal computer to the 9000Pro.
See page 172 for details about connecting a computer. Please note that the
MIDI A terminal (or the TO HOST terminal) should be used when editing the
Board Custom Voices on a computer.
2
Install the software to the computer.
The following software is required.
●
XGworks or XGworks lite
Please see the readme.txt file that can be found in the XGworks lite folder.
●
CBX driver for Windows or USB driver
Please see the readme.txt file that can be found in the CBX driver folder or in the
USB driver folder.
●
Plug-in Editor Software for XGworks (lite)
For installation instructions, refer to the Owner’s Manual of your particular Plug-in
Board.
Place check marks next to all the event types of MIDI Thru Filter in XGworks
or XGworks lite, when editing the Board Custom Voices.
3
If necessary, save any important voice data (Board Custom
Voice and Native System Parameter data in Flash ROM) by
using the Plug-in Manager function (page 68).
Plug-in Editor Software
PLG100-VL, PLG150-VL
VL Visual Editor
PLG100-DX, PLG150-DX
DX Easy Editor, DX Simulator
PLG150-AN
AN Easy Editor, AN Expert Editor
PLG150-PF
PF Easy Editor
104
Содержание 9000 Pro
Страница 1: ......