–10–
CABLE ROUTING
SPEC
J Through the wireharness of so-
lenoid valve between AIS duct
and fuel hose (for CAL).
K Fasten the alarm lead with a plas-
tic band on the tool box plate.
L Fasten the sidestand switch lead
to the bracket of tool box plate
with plastic locking tie.
M Fasten the lead with locking tie
near the side cover.
N Position the all connectors inside
of the connector cover.
O Route the clutch cable through
the cable guide.
P Fasten the handlebar switch
leads (left and right) under the
handle crown with a plastic
band. Set the band at four
notches and install it no slacking.
Q Route the each hoses through the
frame guide and do not pinch it.
R When installing the fitting plate,
do not pinch the each hoses and
wireharness.
S Wher install the AIS push the
wireharness to space of rearside.
