Yamaha 2013 WR205F, Руководство по эксплуатации для владельца

Страница: 45 / 232

2-14
TIGHTENING TORQUES
CHASSIS
△
- marked portion shall be checked for torque tightening after break-in or before each race.
Item
Thread
size
Q'ty Tightening torque Remarks
△
Upper bracket and outer tube M8 4 21 Nm (2.1 m•kg, 15 ft•lb)
△
Lower bracket and outer tube M8 4 21 Nm (2.1 m•kg, 15 ft•lb)
△
Upper bracket and steering stem M24 1 145 Nm (14.5 m•kg, 105 ft•lb)
△
Handlebar upper holder and handlebar
lower holder
M8 4 28 Nm (2.8 m•kg, 20 ft•lb)
△
Handlebar lower holder and upper brack-
et
M10 2 34 Nm (3.4 m•kg, 24 ft•lb)
△
Steering stem and steering ring nut M28 1 Refer to TIP.
Front fork and front fork cap bolt M51 2 30 Nm (3.0 m•kg, 22 ft•lb)
Front fork and base valve M30 2 55 Nm (5.5 m•kg, 40 ft•lb)
Copper
washer
Front fork cap bolt and damper rod M12 2 29 Nm (2.9 m•kg, 21 ft•lb)
Front fork bleed screw and front fork cap
bolt
M5 2 1 Nm (0.1 m•kg, 0.7 ft•lb)
△ Front fork and front fork protector M6 6 7 Nm (0.7 m•kg, 5.1 ft•lb)
△
Front fork protector and brake hose hold-
er
M6 2 7 Nm (0.7 m•kg, 5.1 ft•lb)
Throttle grip cap M5 2 4 Nm (0.4 m•kg, 2.9 ft•lb)
△
Front brake master cylinder M6 2 9 Nm (0.9 m•kg, 6.5 ft•lb)
Brake lever mounting bolt M6 1 6 Nm (0.6 m•kg, 4.3 ft•lb)
Brake lever mounting nut M6 1 6 Nm (0.6 m•kg, 4.3 ft•lb)
Brake lever position locknut M6 1 5 Nm (0.5 m•kg, 3.6 ft•lb)
△
Front brake hose guide and front brake
hose guide bracket
M5 1 4 Nm (0.4 m•kg, 2.9 ft•lb)
△
Front brake hose guide and lower bracket M6 1 4 Nm (0.4 m•kg, 2.9 ft•lb)
Clutch lever holder M5 2 4 Nm (0.4 m•kg, 2.9 ft•lb)
Clutch lever mounting nut M6 1 4 Nm (0.4 m•kg, 2.9 ft•lb)
Hot starter lever holder M5 2 4 Nm (0.4 m•kg, 2.9 ft•lb)
Hot starter lever mounting nut M5 1 2 Nm (0.2 m•kg, 1.4 ft•lb)
Front brake master cylinder cap M4 2 2 Nm (0.2 m•kg, 1.4 ft•lb)
△
Front brake hose union bolt M10 2 30 Nm (3.0 m•kg, 22 ft•lb)
Copper
washer
△
Front brake caliper M8 2 23 Nm (2.3 m•kg, 17 ft•lb)
△
Front brake caliper and brake hose holder M6 1 10 Nm (1.0 m•kg, 7.2 ft•lb)
Pad pin plug M10 2 3 Nm (0.3 m•kg, 2.2 ft•lb)
△
Front brake caliper and pad pin M10 1 18 Nm (1.8 m•kg, 13 ft•lb)
△
Rear brake caliper and pad pin M10 1 18 Nm (1.8 m•kg, 13 ft•lb)
△
Brake caliper and bleed screw M8 2 6 Nm (0.6 m•kg, 4.3 ft•lb)
△
Front wheel axle and axle nut M16 1 90 Nm (9.0 m•kg, 65 ft•lb)
△
Front wheel axle holder M8 4 21 Nm (2.1 m•kg, 15 ft•lb)
△
Front brake disc M6 6 12 Nm (1.2 m•kg, 8.7 ft•lb)
△
Rear brake disc M6 6 14 Nm (1.4 m•kg, 10 ft•lb)