Yamaha 2011 V Star XVS650A Скачать руководство пользователя | Manualshive

Страница: 72 / 94

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-30

7

●

KEEP THIS AND ALL BATTER-
IES OUT OF THE REACH OF
CHILDREN.

To charge the battery

Have a Yamaha dealer charge the bat-
tery as soon as possible if it seems to
have discharged. Keep in mind that the
battery tends to discharge more quickly
if the vehicle is equipped with optional
electrical accessories.

NOTICE

ECA16521

To charge a VRLA (Valve Regulated
Lead Acid) battery, a special (con-
stant-voltage) battery charger is re-
quired. Using a conventional battery
charger will damage the battery.

To store the battery

1. If the vehicle will not be used for

more than one month, remove the
battery, fully charge it, and then
place it in a cool, dry place.

NOTICE:

When removing the

battery, be sure the key is
turned to “OFF”, then discon-

nect the negative lead before
disconnecting the positive lead.

[ECA16302]

2. If the battery will be stored for more

than two months, check it at least
once a month and fully charge it if
necessary.

3. Fully charge the battery before in-

stallation.

NOTICE:

When install-

ing the battery, be sure the key
is turned to “OFF”, then con-
nect the positive lead before
connecting the negative lead.

[ECA16840]

4. After installation, make sure that

the battery leads are properly con-
nected to the battery terminals.

NOTICE

ECA16530

Always keep the battery charged.
Storing a discharged battery can
cause permanent battery damage.

EAU23526

Replacing the fuses

The main fuse and the fuse box, which
contains the fuses for the individual cir-
cuits, are located behind panel B. (See
page 7-8.)
If a fuse is blown, replace it as follows.

1. Turn the key to “OFF” and turn off

the electrical circuit in question.

2. Remove the blown fuse, and then

install a new fuse of the specified
amperage.

WARNING! Do not

use a fuse of a higher amperage
rating than recommended to

1. Fuse box

2. Main fuse

3. Spare main fuse

U1BF21E0.book Page 30 Tuesday, April 20, 2010 11:41 AM

«
...
70
71
72
73
74
...
»

Содержание 2011 V Star XVS650A































































































Отзывы:

Нет отзывов

Похожие инструкции для 2011 V Star XVS650A

Бренд: R&G Страницы: 22

Бренд: R&G Страницы: 8

RACE 13100CP520

Бренд: Yoshimura Страницы: 7

Бренд: Memphis Shades Страницы: 2

Бренд: LSL Страницы: 12

Бренд: Pandora Страницы: 56

Бренд: N-Com Страницы: 2

Super Tenere XTZ1200Z

Бренд: Yamaha Страницы: 108

Бренд: Yamaha Страницы: 100

Бренд: Yamaha Страницы: 351

Бренд: Yamaha Страницы: 96

Бренд: Yamaha Страницы: 398

Бренд: Yamaha Страницы: 666

Бренд: Yamaha Страницы: 190

Бренд: DYNATEK Страницы: 3

Бренд: DYNATEK Страницы: 8

Бренд: Husqvarna Страницы: 12

Бренд: Husqvarna Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды