Yamaha 2009 V Star 1300, Руководство пользователя

Страница: 23 / 90

INSTRUMENT AND CONTROL FUNCTIONS
4-7
4
Odometer, tripmeters, fuel reserve
tripmeter and clock
Push the “ ” side of the “SELECT”
switch to switch the display between
the odometer mode “ODO”, the tripme-
ter modes “TRIP 1” and “TRIP 2” and
the clock mode in the following order:
ODO
→
TRIP 1
→
TRIP 2
→
Clock
→
ODO
TIP
● Push the “ ” side of the “SE-
LECT” switch to switch the display
in the reverse order.
● Push the “RESET” switch for less
than one second to display the
clock for five seconds, regardless
of the currently selected display
mode.
If the fuel level warning light comes on
(see page 4-4), the display will auto-
matically change to the fuel reserve
tripmeter mode “F-TRIP” and start
counting the distance traveled from that
point. In that case, push the “
” side
of the “SELECT” switch to switch the
display between the various tripmeter,
odometer, and clock modes in the fol-
lowing order:
F-TRIP
→
TRIP 1
→
TRIP 2
→
Clock
→
ODO
→
F-TRIP
TIP
Push the “ ” side of the “SELECT”
switch to switch the display in the re-
verse order.
To reset a tripmeter, select it by push-
ing the “
” or “ ” side of the “SE-
LECT” switch, and then push the
“RESET” switch for at least one sec-
ond. If you do not reset the fuel reserve
tripmeter manually, it will reset itself au-
tomatically, and the display will return
to the prior mode after refueling and
traveling 5 km (3 mi).
To set the clock:
1. Push the “ ” or “ ” side of the
“SELECT” switch to change the
display to the clock mode.
2. Push the “ ” side of the “SE-
LECT” switch and the “RESET”
switch together for at least two
seconds.
3. When the hour digits start flashing,
push the “ ” or “ ” side of the
“SELECT” switch to set the hours.
4. Push the “RESET” switch, and the
minute digits will start flashing.
1. Odometer/tripmeter/fuel reserve tripme-
ter/clock
1. Clock
U12C22E0.book Page 7 Friday, October 17, 2008 4:39 PM