manualshive.com logo in svg

Yamaha 2009 V Star 1300, Руководство пользователя

Поделиться
Скачать
Yamaha 2009 V Star 1300 Скачать руководство пользователя страница 21

INSTRUMENT AND CONTROL FUNCTIONS

4-5

4

is detected in the fuel level detec-
tion circuit, the following cycle will
be repeated until the malfunction is
corrected: The fuel level warning
light will flash eight times, and then
go off for 3.0 seconds. If this oc-
curs, have a Yamaha dealer check
the vehicle.

EAU11442

Coolant temperature warning 
light “

” 

This warning light comes on if the en-
gine overheats. If this occurs, stop the
engine immediately and allow the en-
gine to cool.
The electrical circuit of the warning light
can be checked by turning the key to
“ON”.
If the warning light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
cuit.

NOTICE

ECA10021

Do not continue to operate the en-
gine if it is overheating.

TIP

●

For radiator-fan-equipped vehi-
cles, the radiator fan(s) automati-
cally switch on or off according to
the coolant temperature in the ra-
diator.

●

If the engine overheats, see page
7-34 for further instructions.

EAU42772

Engine trouble warning light “

” 

This warning light comes on if a prob-
lem is detected in the electrical circuit
monitoring the engine. If this occurs,
have a Yamaha dealer check the self-
diagnosis system. (See page 4-8 for an
explanation of the self-diagnosis de-
vice.)
The electrical circuit of the warning light
can be checked by turning the key to
“ON”. If the warning light does not come
on for a few seconds, then go off, have
a Yamaha dealer check the electrical
circuit.

EAU38621

Immobilizer system indicator light 

The electrical circuit of the indicator
light can be checked by turning the key
to “ON”.
If the indicator light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
cuit.
When the key is turned to “OFF” and 30
seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
This model is also equipped with a self-
diagnosis device for the immobilizer
system. (See page 4-8 for an explana-
tion of the self-diagnosis device.)

U12C22E0.book  Page 5  Friday, October 17, 2008  4:39 PM

Содержание 2009 V Star 1300



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды