manualshive.com logo in svg

Yamaha 2001 YZF-R1M, Руководство пользователя

Поделиться
Скачать
Yamaha 2001 YZF-R1M Скачать руководство пользователя страница 31

INSTRUMENT AND CONTROL FUNCTIONS

3-10

3

EAU03232

Fuel tank cap 

To open the fuel tank cap
Open the fuel tank cap lock cover, in-
sert the key into the lock, and then turn
it 1/8 turn clockwise. The lock will be re-
leased and the fuel tank cap can be
opened.

To close the fuel tank cap

1. Push the fuel tank cap into posi-

tion with the key inserted in the
lock. 

2. Turn the key counterclockwise to

the original position, remove it,
and then close the lock cover.

NOTE:

@ 

The fuel tank cap cannot be closed un-
less the key is in the lock. In addition,
the key cannot be removed if the cap is
not properly closed and locked. 

@

EWA00025

WARNING

@ 

Make sure that the fuel tank cap is
properly closed before riding. 

@ @ 

EAU01183

Fuel

Make sure that there is sufficient fuel in
the tank. Fill the fuel tank to the bottom
of the filler tube as shown in the illustra-
tion.

EW000130

WARNING

@ 

●

Do not overfill the fuel tank, oth-
erwise it may overflow when the
fuel warms up and expands. 

●

Avoid spilling fuel on the hot
engine. 

@

1. Lock cover
2. Unlock

1. Filler tube
2. Fuel level

E_5jj.book  Page 10  Monday, August 28, 2000  1:29 PM

Содержание 2001 YZF-R1M























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды