manualshive.com logo in svg

Yamaha 2001 YZF-R1M, Руководство пользователя

Поделиться
Скачать
Yamaha 2001 YZF-R1M Скачать руководство пользователя страница 113

CONSUMER INFORMATION

9-2

9

10

EAU03171

Model label 

The model label is affixed to the frame
under the passenger seat. (See page
3-12 for seat removal and installation
procedures.) Record the information on
this label in the space provided. This in-
formation will be needed when ordering
spare parts from a Yamaha dealer. 

EAU01388

MOTORCYCLE NOISE 
REGULATION (for Australia)

TAMPERING WITH NOISE CON-
TROL SYSTEM PROHIBITED:
Owners are warned that the law may
prohibit:

(a) The removal or rendering inopera-

tive by any person other than for
purposes of maintenance, repair
or replacement, of any device or
element of design incorporated
into any new vehicle for the pur-
pose of noise control prior to its
sale or delivery to the ultimate pur-
chaser or while it is in use; and

(b) The use of the vehicle after such

device or element of design has
been removed or rendered inoper-
ative by any person.

1. Model label

E_5jj.book  Page 2  Monday, August 28, 2000  1:29 PM

Содержание 2001 YZF-R1M























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды