Yamaha 2.0, Руководство пользователя

Страница: 130 / 174

126
Feature Reference — Utility Mode
41 MULTI (multi-timbre)
This MULTI sub-mode contains the DTX
settings used as a multi-timbre tone generator.
Use the PAGE
¡ or PAGE ⁄ buttons to select
between this page and the 47th page.
A
If you are using the DTX as a tone generator, you are
required to connect the keyboard or computer (sequencer) to
the DTX using MIDI cable(s). Refer to P.129 for details.
MISC.
SNARE
KICK
CYMBAL
UTILITY
[ MULTI]
A
Move from this page to other sub-modes by rotating the
Data Scroll Wheel or using the +1/YES and -1/NO buttons.
42 MastTune (master tune)
This function sets the master tuning of the tone
generator. Fine tuning can be done by
approximately 1.2 cent increments or
decrements.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to set the parameter.
MISC.
SNARE
KICK
CYMBAL
MastTune
= 0
Settings:
-64 to 0 (normal pitch) to +63 (unit= 1.171875 cent)
43 Program
This assigns (normal) keyboard voices to each
part (1 to 16). Each voice will correspond to
the program change numbers 1 to 128 (GM
system level 1).
A
The drum kit currently selected in Drum Kit Play mode is
assigned to part 10.
!
Move the cursor and select the part number
by rotating the Data Scroll Wheel or using
the +1/YES and -1/NO buttons.
"
Move the cursor to the voice name and select
the voice you want to use.
#
Repeat steps
!
and
"
and assign a voice to
each part.
A
Refer to P.147 for details on voice list.
A
It is also possible to set a part other than 10 to the drum
kit. A drum kit is available after program change number 128.
When this is set to a drum kit (since rhythm instruments are not
assigned to all of the note numbers) the LCD will display "No
Voice" on the LCD when the data transmitted from an external
MIDI device cannot be generated by the DTX.
MISC.
SNARE
KICK
CYMBAL
Program
GrandPno
Voice name
Part number
Settings:
Program change numbers 1 to 128 and a drum kit can
be assigned to parts 1 to 16.