Yalp Sona, Руководство по установке, Страница: 33 / 58

33
YA3500-210723
EN
DE
NL
EN
This radio transmitter has been approved by
the FCC to operate with the antenna types
listed below with the maximum permissible gain
indicated. Antenna types not included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for
use with this device.
Interface and frequency range Type Max gain
3G cellular in band II and IV MCS 108181 / 108182 - AEB260 GSM Dipole
Patch Antenna. -2 dBi
Siretta Tango 27 IP67 Rated Quad Band
GSM/GPRS and 3G Puck Antenna -2.16 dBi
RF EXPOSURE SAFETY
This device complies with ISED RF exposure limits
and has been evaluated in compliance with mobile
exposure conditions.
CAN ICES-003 (B)
This Class B digital apparatus complies with
Canadian ICES-003 47 CFR § 2.1077 Compliance Information.
SUPPLIERS DECLARATION OF CONFORMITY.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
We, Lappset Yalp B.V., hereby declare that the
equipment bearing the model name specified
below was tested conforming to the applicable
FCC Rules under the most accurate measurement
standards possible, and that all the necessary
steps have been taken and are in force to assure
that production units of the same equipment
will continue to comply with the Commissions
requirements.
Unique Identifier: SUTU, TORO, SONA, MEMO
Responsible Party – U.S. Contact Information:
Yalp Inc.
401 Congress Ave
Suite 1540
Austin TX 78701 US
(512) 852-3050
Parts list
WARNING Never try to repair a defect without
the consent of Yalp
WARNING Never replace parts for other then
Yalp original parts. The Yalp product is certified as
a whole, with carefully selecting the best parts for
safety and quality reasons.
Number Part description Amount Material Finish
199-017 Side panel (button) 1 SS304 Powder coated
199-024 Side panel 1 SS304 Powder coated
199-101 Arch frame 2 FE360/SS304 Powder coated
199-111 Polyester cover 2 Polyester -
199-221 L clamp 12 FE360 Galvanized, powder coated
199-231 Adjustment flange 6 FE360 Galvanized
199-320 UFO camera plate 1 Electronics -
199-501 Turf Flooring 1 Turf -
100-235 Anchor 6 FE360 Galvanized