Yale Z-Wave Plus YRMZW2-US Скачать руководство пользователя страница 1

®

®

Yale  Z-Wave  Plus Smart Module

Installation Guide

®

Adding a Yale Z-Wave  Plus Smart Module to your Assure Lock & Z-Wave System

1. On your lock keypad, enter your master entry code followed by the      icon

2. Press the 7 key followed by the      icon

3. Press the 3 key followed by the      icon

4. Open the Z-Wave system's smart home or alarm app and follow the instructions for
    removing a device

5. Remove the Yale Smart Module from the slot above the battery compartment
    

IMPORTANT: 

The batteries must be removed before removing the Yale Smart Module:

        •    Remove battery cover
        •    Remove batteries
        •    Insert or remove Yale Smart Module
        •    Reinstall batteries 
        •    Reinstall battery cover

6. If you're adding a new Yale Smart Module, follow the instructions included with it

P/N AYR202-ZW-INSTAL-FUL Rev E

®

®

Removing a Yale Z-Wave  Plus Smart Module from your Assure Lock & Z-Wave System

1. Install the Yale Smart Module into the slot above the battery compartment
    

IMPORTANT: 

The batteries must be removed before removing the Yale Smart Module:

        •    Remove battery cover
        •    Remove batteries
        •    Insert or remove Yale Smart Module
        •    Reinstall batteries 
        •    Reinstall battery cover

2. Open the Z-Wave system's smart home or alarm app on your smartphone or tablet 

3. Follow the in-app instructions for adding a new device

4. On your lock keypad, enter your master entry code followed by the      icon

5. Press the 7 key followed by the      icon

6. Press the 1 key followed by the      icon

Please use this procedure only when network primary controller is missing 
or otherwise inoperable.

Содержание Z-Wave Plus YRMZW2-US











Отзывы: