Yale RealLiving YRT210, Инструкция по установке и программированию

Страница: 17 / 24

17
An ASSA ABLOY Group brand
P/N AYRT-220-INST-FUL Rev B
Factory Default Settings
*
Upon reset (and initialization) of the lock, Master PIN Code
Registration is the only option available and must be
performed
prior to any other programming of the lock.
Settings Factory Default
Master PIN Code Registration required
Automatic Re-lock Disabled
Inside Indicator Light Disabled (Off)
One Touch Locking Enabled
Volume Setting Enabled (Low)
Automatic Re-lock Time **30 Seconds
Wrong Code Entry Limit **5 Times
Shutdown Time **60 Seconds
**Adjustable only when using Network Module
To reset the lock to factory default, see the following:
The following procedure returns the lock to its factory defaults
by deleting all user codes
(including the Master PIN code * ) and
returning all programming features to their original factory default
settings (see table below).
1. Remove the batteries and then remove the interior escutcheon
to access the reset button.
2. The reset button (see image at right) is located above the
PCB cable connector.
3. Hold down the reset button for a minimum of 3 seconds and
then reinstall the batteries; once the batteries are properly
installed, release the reset button.
All features, including adjustable settings** (see below) should
now be returned to factory default.
Reset Lock to Factory Default
Reset Button
Interior Escutcheon
See
this section
for programming instructions.