manualshive.com logo in svg

Yale MSW020-E, Руководство по эксплуатации

Поделиться
Скачать
Yale MSW020-E Скачать руководство пользователя страница 11

The Nameplate for the lift truck is found on the frame. The
capacity shown is for a lift truck equipped as shown on the
nameplate. The capacity is specified in kilograms (kg) and
pounds (lb). The capacity is the maximum load that the lift
truck can handle for the load condition shown on the
Nameplate.

The maximum capacity for the lift truck must be shown on
the nameplate. If the lift truck nameplate already has a
capacity for special load handling equipment, it will be lis-
ted. Make sure the Nameplate data is complete and fully
understood before operating the lift truck.

The lift truck serial number code is on the Nameplate. The
serial number code is also stamped on the lift truck frame.

When a unit is shipped incomplete from the factory to the
dealer, the Nameplate is covered by a label as shown in

Figure 1

. If your lift truck has this type of label, do not oper-

ate the lift truck.

Contact your dealer for 

Yale

 lift trucks to obtain a complete

Nameplate.

Figure 1. Nameplate

Nameplate, Warning Labels, and Decals

The Nameplate, Warning Labels, and Decals are shown in

Figure 2

.

Model Description

9

Содержание MSW020-E



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды