Yale HSA3400 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 20

Yale HSA3400 Скачать руководство пользователя страница 13

13

Setting or changing your user PIN

code

1

Put the keypad into program mode by entering
the 0000 default code and pressing TEST.

2

Enter 0000 then CLR, enter your new 4 digit
PIN code and press PROG, the keypad will
beep to confirm.

3

Press OFF twice on the keypad to exit the
program mode.

• If the PIN doesn’t change, repeat the above

sequence quickly without gaps.

• Write your code in the space provided below so

you don’t forget it.

• If you wish to change the PIN code again, you

will have to enter your existing code, rather
than 0000.

• If an unauthorised user attempts to guess the

code by entering random four digit numbers,
the keypad will produce a series of warning
beeps. On a fourth wrong attempt, it will lock
out for one minute.

Arming the system

To arm the system, enter your 4-digit PIN code

and press ARM, the siren will beep once and
flash. You can now leave the premises.
• After arming the system you have 20 seconds

exit time to leave the premises. Any detector
activated during this time will be ignored by the
system.

• The system does not have an audible

countdown during the exit time.

• System tampers will be active during the exit

time.

Disarming the system

After entering the premises, disarm the system

by entering your PIN code and press OFF. The
siren will beep twice and flash.
• Upon entering the premises, the first detecter

activated (usually a door/window contact on the
main point of entry) will cause the 20 second
entry time to start. During the entry time any
detector activated will be ignored by the
system.

• The siren will beep once when the first detector

is activated.

• If the system is not disarmed before the entry

time expires the alarm will be activated.

• The system does not have an audible

countdown during the entry time.

• System tampers will be active during the entry

time.

Stopping the alarm

If the alarm is activated the siren wil sound and

flash the strobe LEDs. To stop an alarm, enter your
PIN code and press OFF. The siren will stop
sounding and beep twice.

PIR sleep timer

Please remember when testing, that the PIR

has a sleep timer. See section 4 for details.

Using the system

Arm and disarm the system and practice using it. Trigger the alarm by arming the system
and opening protected doors/windows and walking past PIRs. Now’s the time to set
your pin code and show the rest of the family how simple it is to use.

6

My PIN code

www.ukpanels.com

«
...
11
12
13
14
15
...
»

Содержание HSA3400





















Отзывы:

Нет отзывов