Wirefree Yale ENA-DC
Magnetic Door/Window
contact
Features:
1. Learn / Test Button
-Press the Test button once to enter Test
Mode for 3 minutes.
-Press & hold the Test button for 8 seconds
to enable Tilt Switch function.
2. LED Indicator
3. Tilt Switch
4. Supervision Enable / Disable Jumper
5. Battery
6. Battery Insulator
7. Top & Bottom Cover securing screw hole
8. Knockouts
9. Rib Mark (for aligning magnet)
Pack contents:
1 x Door contact
1 x Magnet
2 x Magnet spacer
4 x Screws
4 x Wall plug
2 x Adhesive stickers
1 x ½ AA lithium battery
Supervision Enable/Disable Jumper
After installation, the DC will automatically transmit
Supervisory signals periodically to the Control Panel
at random intervals of less than 20 minutes. If the
Control Panel has not received the signal from the
DC for the preset period of time, the Control Panel
will indicate on its display that the particular DC is
experiencing an out-of-signal problem.
Jumper On= Supervision Disabled
Jumper Off= Supervision Enabled (Default)
SmartHome Alarm series
8
9
1
2
8
6
7
3
5
4
