1031955F-/8
• Loosen
adjusting knob
until it stops.
• Lift
loop handle
up & open.
ReLeAse BAR CLAMP:
Open The Jaw.
AttACH:
Jaw bites bar.
sLide Wheel
strap into tray:
Consider where
rear tire will be.
Strap may need
to go on
before securing
tray to bar.
PULL
red lever oPen.
• security pin must enter
small hole!
Skewer
direction is
your choice:
Consider
lock access.
inseRt sKeWeR:
Twist & Push.
• Lift
loop UP.
• thread
adjustment
knob
completely.
NO
TE: Loop handle must be up and in before
the
Jaw
can be opened or closed.
insert bolt head
into slot in tray.
foR Added
seCURity—
attach to bar
between
towers.
WARninG:
Silver clasp
must engage
the lower
jaw
securely
to the bar
for safe
transport.
• Close onto bar:
silver clasp must
snAP.
test clamping on
bar
for tightness.
PUsH
SilveR claSP
to release
Jaw.
•
Close
red
lever to
secure jaw.
Red lever UP will loosen
bike mount on bar.
instALL
end Cap
• PUsH
lock
housing inward.
oPen
Jaw.
slide the “C”Clip
into groove
on skewer tip.
insert skewer into steelHead
by twisting
and
pushing
(it may be tight at first).
LooP MUst
Be UP
!
Bolt threads go
into square hole
in Snaparound.
secure with Hex
Key (nut).
attach
Snaparound
to opposite
bar.
Groove at tip of
skewer is visible only
when loop is up and knob is tight.
AsseMBLe & AttACH ReAR:
