6100015154_9812176 _Rev3
3/6
4
INSTALL PLATE
Install the Front and Rear Spacers onto the exposed contents in the vehicle roof.
CLEAN ROOF
Wipe clean any dirt that may have built up in and
around all mounting holes.
Tighten all Capscrews with the provided 6 mm T Handle Ball
End Allen Key, and all Nuts with a 13 mm Spanner or a suitable
Torque Wrench.
Ensure all Capscrews and Nuts are tightened to 7 Nm.
SECURE PIVOT BRACKET ASSEMBLIES
ASSEMBLE PIVOT BRACKET
TO RUGGEDLINE
Assemble Pivot Bracket and M8
hardware as pictured. Complete
this for the 2 mounting holes on
top of the RuggedLine Spine.
Pivot Mount Bracket
Assembly
M8 Nyloc Nut
M8 Washer
20 mm M8 Socket Head Capscrew
M8 Washer
MOUNTING LOCKNLOAD PLATFORM
5
6