BEFORE DRIVING AWAY
MAINTENANCE
To keep your LockJaw
operating smoothly, apply
non-water soluble lubricant
occasionally to threads and
moving parts.
NOTE: The front wheel
of the bicycle must rest
inside the Hoop.
Set your bicycle in the
Wheel Tray with the Hoop
lying flat between the
wheels.
M
OVE BUTTONS
in or out
to accommodate
the diameter of
your bicycle‘s
down tube.
Make sure Wheel Straps are SECURE.
Make sure Jaws are TIGHTLY closed.
CHECK ALL HARDWARE BEFORE DRIVING AWAY!
WATER BOTTLE CAGES on
the leading side of the down
tube must be removed if they
interfere with the Jaws.
Securing Your Bike
• OPEN Jaws (Red Lever up)
In the open position, Jaws should
clear the down tube. If not, loosen or
tighten as needed.
Close the Red Lever so that
the Jaws clamp the down tube
firmly.
CLOSE
LOOSEN TIGHTEN
OPEN
SKS
®
Lock Cores
are optional.
To install SKS
®
Lock Cores, refer
to lock
instructions.
Secure Front and Rear Wheels
Pull the strap
through wheel
spokes.
Insert the strap
end behind the red button.
Tighten strap by lifting the red tab up.
Check your wheel
and tighten the
strap if necessary.
Release the strap
by pushing the
button.
SECURE THE REAR WHEEL.
• RAISE Hoop
• ROLL bicycle forward as Jaws
meet the down tube.
Locks…
Some bike wheels may
be too narrow to allow
a tight fit. Slide the
strap in the tray until it
rests against the rim.
Tighten.