Seal exposed
metal with
touch-up paint.
Make sure top of fastener is
flush with rooftop.
1033034B-3/12
Carefully blow
away debris.
Apply a silicone
bead over the holes.
WARNING: Direct contact of
uncured sealant irritates
eyes and may irritate skin.
Overexposure to vapor may
irritate eyes, nose and
throat. Avoid eye and skin
contact. Use with adequate
ventilation. Do not handle
contact lenses with sealant
on hands. In case of eye
contact, flush with water for
15 minutes. Obtain medical
attention. In case of skin
contact, remove from skin
and flush with water. Sealant
releases acetic acid
(vinegar-like odor) during
cure.
Remove Towers and
assemble Landing Pads.
• Attach rubber pads.
Bolt
Metal
washer
Insert assembled Landing Pads
into fasteners.
Screw bolt into fastener.
Do not fully tighten.
Attach Control Towers and
finish tightening bolts.
” S N A P ”
Note: Orient fasteners to
avoid obstructions.
Firmly close covers
until both sides snap.
Push down and fully
tighten Towers.
