1033546B-4/18
SeCure mounting aSSembLy
tighten CarrierS to univerSaL mountS
SkiLift inStaLLation: open CarrierS
Make sure carriers
are vertically
aligned.
• Slide carrier to expose
unsecured bail screw.
• Use hex wrench to
tighten screws.
open Carrier
verify binding CLearanCe
if you have sufficient
clearance,
proceed to step 23
If you need more binding clearance, or if
factory bars are arched and cannot align
with carriers,
continue to neXt step for
skilift attachment.
remove base screw at
hinged-end of carriers.
Loosen front base
screw, but do not
remove the screw.
Lift hinged Side
of Carrier
reinstall
base screw
into mounting
hardware.
-or-
In some cases the
universal mount will
sit at an angle.
Load SkiS or
SnowboardS
• Load ski tips to the rear of your car.
• Load bindings between the carriers.
