1034176F-5/18
CAUTION: Keep fingers away from ALL moving parts!
FOLD MAST DOWN TO ACCESS THE REAR:
PULL
Never fold
down mast
with bikes
loaded.
•
Unload the bikes.
•
Push the top of the mast
towards the vehicle while
pulling the release knob
upward simultaneously.
•
Carefully fold mast down.
•
When finished be sure to
bring the mast to the full
upright and locked position.
CAUTION: NEVER operate vehicle with DoubleDown ACE in folded down position!
Check that release knob is in locked position by pulling on mast.
PERFORM SAFETY CHECKS
•
Mast must be locked into place when operating
vehicle.
•
Be sure the Rubber Straps are hooked securely over
the bike frames.
•
Replace Rubber Straps if cracked or worn.
•
Be sure all hardware is secured according to
instructions.
•
Do not let bicycle tires hang near vehicle’s hot exhaust.
This product is designed for a hitch
receiver, Class II or greater. Some Class
I receivers may not accept this product.
If you do not know the capabilities
of your hitch receiver, consult an
automotive professional.
•
Pull release lever
forward.
•
Pull up slightly on arms
while pulling lever.
•
Fold arms.
Be sure arms
lock in down
position.
FOLD CARRIER ARMS WHEN NOT IN USE.
•
Access lock cable
from recess at rear
of mast.
•
Pass cable through
bike frame.
•
Attach lock to pin
at end of the arm.
•
Lock the lock.
TO LOCK BIKES TO MAST
USE LOCK CABLE.
