1033569C-3/12
Load your bike’s forks.
Attach hex
key but do not
tighten.
Release a
strap end by
pressing the
red button.
SQUARE BARS:
you may need to reposition
the bolt as in Step 9 to
angle the tray.
Tighten the hex key.
ROUND BARS:
Rotate wheel tray to
accommodate bike wheel.
Tighten the hex key.
Rest the rear wheel
into the tray.
insert strap
end behind red
button.
Pull the strap
tightly against
the wheel rim.
If tray can move on the bar,
tighten the hex key.
Secure the
Rear Wheel.
Your bike’s forks are secure
onLY after the lever closes
with solid resistance.
tESt yOuR inStALLAtiOn! if forks can move in the mount,
open the lever and tighten the adjustment knob more.
Set the bicycle forks
vertically onto the skewer.
Prevent damage
to your forks!
use extra caution when
installing, or removing bikes with
CARBOn FiBER FORkS. Fork tips
can crack, or bend if bike is not
loaded vertically.
with lever open, tighten
adjustment knob clockwise
until the lever closes with
FiRM resistance.
noTE: Shaft will turn
with adjustment knob.