1033041B-2/9
Tools must be installed head to the rear.
• Axe mounts blade up.
• Shovel must clear
crossbar and
curve away from you.
NOTE: Install brackets a
minimum of 3 spaces apart
and not over a joint.
Snap 2 larger clamps
around the upper tube on
either side of the 1/2”
vertical tube.
Attach back plate.
• Insert spacers.
• Insert screws.
• Do not tighten
completely.
Pry apart smaller clip and
attach at base of vertical tube
flat side to front.
Insert and tighten screw using
wrench to stabilize locknut.
Tighten all screws.
Install front plate into
front slot.
Repeat
installation
for second
bracket.
INSTALL
BRACKETS A
MINIMUM OF 3
SPACES APART
AND NOT OVER
A JOINT.
• Determine the best spacing for
brackets.
BEFORE YOU BEGIN
