2
3
1033368B-/15
AttAChing the BoAt/Box holder
• The bottom of the arms can only be
placed on the vertical assemblies
where there is nothing covering the
vertical tubes.
• Remove gear and accessories from the
system that could interfere with the
installation.
Though it is possible to store heavy items at the
highest available point, always use caution during
loading and unloading from heights.
Have assistance whenever possible.
Couplers
• LOOSEN the screws on the
couplers.
• Slide the coupler housings
off the sleeves.
• Open the coupler sleeves.
Sleeve
HouSing
AttACh Couplers
OPEN
Close sleeve…
Attach housing…
Open housing.
Couplers Must Be
leVel to eACh other.
Sleeve
Screw
• Make sure the sleeve screws hang down.
• Align the peg on the inside of the sleeve with the
hole in the vertical assembly tube.
• Close the sleeve around the tube.
