4
5
6
1033368B-3/15
AttACh 2 pAds to
eACh BoAt ArM
AttACh ArMs
• With flat end of C-clips facing the
coupler, slide arm into coupler.
• Close the coupler.
• Tighten the screw hanging below the
coupler with the 5/32” hex wrench.
moisten the inside of
the pads with water and
slide them on to the arms.
You will need to
moisten the pads to
move them at any time.
• Insert two C-clips into the
grooves on the end of each arm.
• The flat edge of the clip must
face away from the arm.
AttACh C-Clips
If the flat end of
the C-clips are not
facing into the
coupler, the coupler
will not close.
