Yaesu VX-8GR, Руководство по эксплуатации

Страница: 64 / 168

VX-8GR O
PERATING
M
ANUAL
62
P
ROGRAMMABLE
(
B
AND
L
IMIT
)
M
EMORY
S
CAN
(
PMS
)
This feature allows you to set sub-band limits for either scanning or manual VFO opera-
tion. For example, you might wish to set up a limit (in North America) of 144.300 MHz to
148.000 MHz to prevent encroachment into the SSB/CW “Weak Signal” portion of the
band below 144.300 MHz. Here’s how to do this:
1. Set the radio to the VFO mode by pressing the
c
key, if necessary.
2. Using the techniques learned earlier, store (as in the above example) 144.300 MHz
into Memory Channel #
L1 (the “L” designates the Lower sub-band limit).
3. Likewise, store 148.000 MHz into Memory Channel # U1 (the “U” designates the
Upper sub-band limit).
4. Press and hold in the
B
key for one second and rotate
the DIAL knob while holding in the
B
key to select the
desired PMS frequency pair ( PMSxx ).
5. Release the
B
key to start scanning within the just-pro-
grammed range. The “ VFO ” label will be replaced by “ PMS ”
and the Band number will be replaced by “
Pxx
”. Tuning
and scanning will now be limited within the just-pro-
grammed range.
6. 50 pairs of Band Limit memories, labeled L1 / U1 through L50 / U50 are available.
You therefore can set upper and lower operation limits on a number of bands, if you
like.
7. To exit to normal operation, press the
c
key.
S
CANNING