Yaesu VX-8GR, Руководство по эксплуатации

Страница: 60 / 168

VX-8GR O
PERATING
M
ANUAL
58
S
CANNING
M
EMORY
S
CANNING
Memory scanning is also easy to initiate:
1.
Set the radio to the Memory Recall (“MR”) mode by pressing the
c
key, if neces-
sary.
2. Press and hold in the
B
key, then rotate the DIAL knob while holding in the
B
key (the current Memory Scan mode will appear on
the frequency display) to select the desired Memory Scan
mode. Available selections are
ALL CH , TAG1 , TAG2 , BAND ,
and PMS-X .
ALL CH : The scanner sweeps all Memory channels.
TAG1 : The scanner sweeps only those Memory channels with the same first digit of
the alpha/numeric tag as the first channel on which scanning started.
TAG2
: The scanner sweeps only those Memory channels with the same first and
second digits of the alpha/numeric tag as the first channel on which scan-
ning started.
BAND : The scanner sweeps only those Memory channels which are memorized on
the same operating band as the first channel on which scanning started.
PMS-X
: The scanner will sweep frequencies within the currently-selected PMS fre-
quency pair. See page 62 for details.
3. Release the
B
key to start scanning.
4. As with VFO scanning, the scanner will halt on any signal encountered that is strong
enough to open the squelch; it will then resume scanning according to the Scan-Re-
sume mode set previously. When there are no memory channels corresponding to the
selected Memory Scan mode, the “
MS ERR ” notation will appear on the display.
5. To cancel scanning, press the PTT switch or
c
key.