Yaesu VX-8GR, Руководство по эксплуатации

Страница: 109 / 168

VX-8GR O
PERATING
M
ANUAL
107
S
ENSOR
M
ODE
The VX-8GR always displays the “Battery Voltage” and “Cur-
rent Time” while the VX-8GR is operating in the “Mono” band
mode with the Large characters. You may change the “Battery
Voltage” display to the “Temperature” display which indicates
the current temperature inside the transceiver’s case.
To change the display from the “Battery Voltage” to the “Temperature”:
1.
Press and hold the
m
key for one second to enter the Set Mode.
2. Rotate the
DIAL
knob to select Set Mode Item 78:
SENSOR DISPLAY
.
3. Press the
m
key briefly to enable adjustment of
this Set Mode Item.
4. Rotate the DIAL knob to select “ TEMP ”.
5. Press the PTT switch briefly to exit to normal op-
eration and display the sensor information on the dis-
play.
To return to the “Battery Voltage” display, just repeat the above procedure, rotating the
DIAL
knob to select “ DC ” in step “4” above.
1) When “OFF” is selected in step “4” above, the VX-8GR displays only the
“Current Time” while the VX-8GR is operating in the “Mono” band mode
with the Large characters.
2) You may monitor the “Battery Voltage” using Set Mode Item 20: DC VOLTAGE, and
the “Temperature” using Set Mode Item 79: SENSOR INFO .
C
LOCK
S
ET
The
VX-8GR
has a 24-hour clock with a calendar which covers all dates from January 1,
2000 through December 31, 2099 (accuracy: ±30 sec/month).
To set the clock:
1.
Press and hold the
m
key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item
90:
TIME SET .
3. Press the
m
key briefly to enable adjustment of
this Menu Item.
4. Rotate the DIAL knob to select the “ year ” setting.
5. Press the
M
key briefly, then rotate the
DIAL
knob to
select the “
month
” setting.
6. Repeat the above step to set the “ day ,” “ day of the week ,”
“
hour
,” and “
minute
” selections.
7. Press the
M
key briefly, then rotate the
DIAL
knob to set
“Timer Signal” On (
SIG
) or Off (
––
). In the “
SIG
” mode, a