Yaesu VX-8DR/E, Руководство по обслуживанию

Страница: 21 / 118

21 VX-8R/E and VX-8DR/E Technical Supplement
NOTICE
: Do not touch the following Alignment Menus:
" PLL REF "
" S1 LEVEL " with " WFM " icon
" S9 LEVEL " with " WFM " icon.
" HI POWER "
" L3 POWER "
" L2 POWER "
" L1 POWER "
" MAX DEV "
" HI POWER "
" 100.0Hz "
" DCS 023 "
B-Band 144 MHz Band Adjustment
Press the [ BAND ] key to select the 144 MHz Amateur
band.
Receiver Sensitivity Adjustment (TUNE DC)
Ì
Connect the test equipment as shown in Figure 2: RX
Alignment Setup.
Ì
Rotate the
DIAL
knob to select the Alignment Menu
" TUNE DC ".
Ì
Set the RF Signal Generator output to 145.100 MHz, at
a level of -10 dBµ, ±3.5 kHz deviation with a 1 kHz
audio tone.
Ì
Press the [
V/M
] button (the " " icon will appear on
the display).
Ì
Rotate the DIAL knob for maximum deflection on the
SINAD meter.
Ì
Press the [
V/M
] button (the " " icon will disappear on
the display).
Squelch Hysteresis Confirmation (HIS SQL)
Ì
Rotate the DIAL knob to select the Alignment Menu
" HIS SQL ".
Ì
Confirm that the alignment value is "0".
Squelch Threshold Adjustment (THLD SQL)
Ì
Connect the test equipment as shown in Figure 2: RX
Alignment Setup.
Ì
Rotate the
DIAL
knob to select the Alignment Menu
" THLD SQL ".
Ì
Set the RF Signal Generator output to 145.100 MHz, at
a level of -11 dBµ, ±3.5 kHz deviation with a 1 kHz
audio tone.
Ì
Press the [
V/M
] button (the " " icon will appear on
the display).
Ì
Press the [
F/W
] key two times to store the Squelch
Threshold level.
Ì
Press the [
V/M
] button (the " " icon will disappear on
the display).
Alignment