Yaesu VX-450 series, Руководство по обслуживанию

Страница: 40 / 71

40 VX-450 Series UHF Band Service Manual
DCS D
EVIATION
<W
IDE
> / <N
ARROW
>
This parameter is to align “DCS Deviation” of the selected channel.
Alignment

1. Press the “DCS Dev (W / N)” button to start the
alignment.
The DCS Deviation Alignment window will ap-
pear.
2. Click the left mouse button on the slide bar or
press the Up / Down arrow key, to select the de-
sired channel.
3. Click the “PTT” button or press the “SPACE” bar
the radio starts to transmit with DCS Code on
the selected channel.
4. Set the value to get desired deviation (Wide: 0.6
kHz, Narrow: 0.3 kHz) on the deviation meter
by dragging the slide bar, clicking the up-down
button, pressing the left or right arrow key, or
entering the value in the entry box on the selected
channel.
5. After getting the desired deviation click “PTT”
button or press “SPACE” bar to stop transmitting.
6. Click the “OK” button to finish the DCS Devia-
tion alignment and save the data.
ADJ Type
Basic
: “Low-edge / band center / high-edge“
and select the channel for alignment
(Default).
Single : Alignment value changes only on the
selected channel.
All Freq : Alignment value changes on all chan-
nels.