40
VR-120D O
PERATING
M
ANUAL
The
VR-120D
includes a convenient "Clone" feature, which allows the memory and con-
figuration data from one radio to be transferred to another
VR-120D
. Here is the proce-
dure for Cloning one radio's data to another:
1.
Turn both radios off.
2.
Connect the optional
CT-35
cloning cable between the SP jacks of the two radios.
3.
Press and hold in the [
FUNC
] and [
BAD
s
] keys while turning the radio on. Do this
for both radios (the order of the switch-on does not matter).
4.
On the
Destination
radio, press the [
SCAN
] key.
5.
Now, on the
Source
radio, press the [
MODE
] key.
If there is a problem during the cloning process, "ERROR" or "WAR" will be dis-
played. Check your cable connections and battery voltage, and try again.
6.
If the data transfer is successful, "PASS" will appear on the displays of both radios.
Press any key to exit to normal operation.
7.
Turn both radios off and disconnect the
CT-35
.
Cloning
Source radio
Destination radio
CT-35 cloning cable schematic
3.5 mm 3-contact Plug
It connects
It connects
It doesn't connect
It doesn't connect
3.5 mm 3-contact Plug
SP
jack
Þ
SP
jack
Þ
CT-35 cloning cable
