16
VR-120D O
PERATING
M
ANUAL
Basic Operation
C
HANGING
THE
C
HANNEL
S
TEPS
This radio's synthesizer provides the option of utilizing channel steps of 5/6.25/9/10/12.5/
15/20/25/30/50/100 kHz per step, as well as an automatic step selection based on the
current listening frequency ("AUTO"). Additionally, the digit of the frequency to be changed
during "Fast" tuning may be selected, so as to allow rapid frequency excursions at the rate
you prefer.
To change the channel steps:
1.
Press the [
SCAN
] key while pressing the [
FUNC
] key to activate the "Set" (Menu)
mode.
2.
Rotate the
DIAL
knob to select Menu #00 [STEP].
3.
Rotate the
DIAL
knob while pressing the [
FUNC
] key to se-
lect the desired frequency step size for normal tuning via the
DIAL
knob.
4.
If you want to change the frequency digit which changes dur-
ing "Fast" tuning, rotate the
DIAL
knob to select Menu #01
[F STEP]; press and hold in the [
FUNC
] key; while holding
it in, rotate the
DIAL
knob to select the changed during fast
tuning.
5.
Press the [
SCAN
] key while pressing the [
FUNC
] key to save the new setting and exit
to normal operation.
