Yaesu GS-232B, Руководство пользователя

Страница: 9 / 24

7
c
omputer
c
onnection
i
nst
alla
tion

With the computer switched off, connect the DSUB-
9 pin Straight RS-232C cable to the serial port of your
computer, then connect the other end of the RS-232C
cable to the RS-232C connector on the rear panel of
the GS-232B .

Turn the computer’s power switch on, then turn the
GS-232B ’s power switch on.

Within 15 seconds of swithing the GS-232B ’s power,
press the [

] (
E
ntEr
) key several times to adjust the
GS-232B ’s data baud rate to the Computer’s data
baud rate. If the computer is successul to setting the
data baud rate, the computer’s diaplay will show
“
Connect OK
.”

If you are using a G-400 Azimuth Rotator, or G-
5400B/G-5600B A
z
-E
l
Rotator, press [
P36
]

[

]
(P, 3, 6, and
E
ntEr
) on the computer keyboard to dis-
able the 450° rotation capability of the GS-232B . To
restore 450° rotation capability, press [
P45
]

[

] (P,
4, 5, and
E
ntEr
) on the computer keyboard.