Yaesu GS-232B, Руководство пользователя

Страница: 7 / 24

5
i
nst
alla
tion
p
ower
& c
ontrol
c
onnections
G-5400B/-5600B Az- e
l
Rotator

Connect the supplied DC cable to a source of 12
VDC. The red lead connects to the Positive (+) DC
terminal, and the black lead connects to the Negative
(–) DC terminal. The GS-232B requires 70 mA. The
supplied cable has a 500-mA fast-blow fuse. Use only
the same type fuse for replacement.

Plug the coaxial power connector into the DC 12V
jack on the GS-232B rear panel.

Connect the supplied Control cable (“Dual 5-pin”

“DIN”) between the rotator’s controller and GS-232B .
Be careful to match the “
AZ
” and “
EL
” labels on the
cable with the same labels on the rear panel of the
GS-232B (Figure 2).
G-400/G-500 or G-400/G-550 & pair of GX-500

Connect the supplied DC cable to a source of 12
VDC. The red lead connects to the Positive (+) DC
terminal, and the black lead connects to the Negative
(–) DC terminal. The GS-232B requires 70 mA. The
supplied cable has a 500-mA fast-blow fuse. Use only
the same type fuse for replacement.

Plug the coaxial power connector into the DC 12V
jack on the GS-232B rear panel.

Connect the 5-pin to 5-pin cable (supplied with the
GX-500 ; requires two sets) between the GX-500 (s)
and GS-232B (Figure 3).
GX-500
Figure 3
To DC 12V Power Source To Serial port of the computer
To Elevation
Controller
To Elevation
Rotator
To Azimuth Controller
To Azimuth Rotator
GX-500
Figure 2
To DC 12V Power Source To Serial port of the computer
G-5400B/-5600B
or G-5500
A
z
/E
l
Rotator