manualshive.com logo in svg
background image

14

YAESU LIMITED WARRANTY

Limited Warranty is valid only in the country/region where this product was originally 

purchased.

On-line Warranty Registration:

Thank you for buying YAESU products! We are confident your new radio will serve your 

needs for many years! Please register your product at 

www.yaesu.com

 - Owner’s Corner

Warranty Terms:

Subject to the Limitations of the Warranty and the Warranty Procedures described below, 

YAESU MUSEN hereby warrants this product to be free of defects in materials and 

workmanship in normal use during the “Warranty Period.” (the “Limited Warranty”).

Limitations of Warranty:

A. YAESU MUSEN is not liable for any express warranties except the Limited Warranty 

described above.

B. The Limited Warranty is extended only to the original end-use purchaser or the person 

receiving this product as a gift, and shall not be extended to any other person or transferee.

C. Unless a different warranty period is stated with this YAESU product, the Warranty Period 

is three years from the date of retail purchase by the original end-use purchaser.

D. The Limited Warranty is valid only in the country/region where this product was originally 

purchased.

E. During the Warranty Period, YAESU MUSEN will, at its sole option, repair or replace 

(using new or refurbished replacement parts) any defective parts within a reasonable 

period of time and free of charge.

F.  The Limited Warranty does not cover shipping cost (including transportation and insurance) 

from you to us, or any import fees, duties or taxes.

G. The Limited Warranty does not cover any impairment caused by tampering, misuse, failure 

to follow instructions supplied with the product, unauthorized modifications, or damage 

to this product for any reasons, such as: accident; excess moisture; lightning; power 

surges; connection to improper voltage supply; damage caused by inadequate packing or 

shipping procedures; loss of, damage to or corruption of stored data; product modification 

to enable operation in another country/purpose other than the country/purpose for which 

it was designed, manufactured, approved and/or authorized; or the repair of products 

damaged by these modifications.

H. The Limited Warranty applies only to the product as it existed at the time of the original 

purchase, by the original retail purchaser, and shall not preclude YAESU MUSEN from 

later making any changes in design, adding to, or otherwise improving subsequent 

versions of this product, or impose upon YAESU MUSEN any obligation to modify or alter 

this product to conform to such changes, or improvements.

I.  YAESU MUSEN assumes no responsibility for any consequential damages caused by, or 

arising out of, any such defect in materials or workmanship.

J. TO THE FULLEST EXTENT PERMITTED BY LAW, YAESU MUSEN SHALL NOT BE 

RESPONSIBLE FOR ANY IMPLIED WARRANTY WITH RESPECT TO THIS PRODUCT.

K. If the original retail purchaser timely complies with the Warranty Procedures described 

below, and YAESU MUSEN elects to send the purchaser a replacement product rather 

than repair the “original product”, then the Limited Warranty shall apply to the replacement 

product only for the remainder of the original product Warranty Period.

L. Warranty statutes vary from state to state, or country to country, so some of the above 

limitations may not apply to your location.

Содержание G-450ADC





















Отзывы: