Yaesu FTM-3200DE, Руководство для продвинутых пользователей

Страница: 4 / 35

4
FTM-3200DR/DE Advance Manual
Advanced Operation
Programming the Key Assignments
Default FTM-3200DR key functions have been assigned to the Microphone [ P3
]/[
P4
] keys
at the factory. The user may change these key function assignments, if quick access to
another function is desired.
Note: The default setting: [ P3
] - WIRES
[
P4
] - WX CH (T CALL: EXP/European version)
To change the assignments for the programmable keys:
1. Press and hold in the [
MHz
(
SETUP
)] key
for one second, then rotate the DIAL knob
to select the Menu Item to configure the de-
sired microphone button: (“
PRG P3 29 ” or
“ PRG P4 30 ”).
2. Press the [ MHz
(
SETUP
)] key, then rotate
the DIAL knob to select the function you
wish to assign to the key you selected in the
previous step.
VOL
DIAL
SQL
TXPO D W M W SETUP
REV D/A V / M M H z
The available program functions differ slightly for each of the four keys, the choices include:
SQL OFF:
Open the Squelch to allow un-muted reception.
HOME:
Recall the home channel.
WX CH:
Switches operation to the Weather channels bank.
CD SRCH:
Engages the Tone or DCS Search Scanning feature.
SCAN:
Engages the Scan operation.
T CALL:
Activates 1750 Hz Tone Burst.
TX POWER:
Set the transmission power level.
DIG/ANA:
Change the communication mode (Digital/Analog).
GM:
Activates the GM (Group Monitor) function.
WIRES:
Activates the WIRES-X function.
Alternatively, one of the Set Menu items previously assigned may be set. To assign
another desired Set Mode item to a programmable key, see the description in the box
shown below.
3. Press and hold in the [ MHz
(
SETUP
)] key for one second to exit to normal operation.
You may assign Set Mode items to the Microphone [ P3
]/[
P4
] buttons, as well, to
do this:
1. Press and hold in the [
MHz
(
SETUP
)] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select the Set Mode Item that you wish to assign to the
key as a Menu short cut.
3. Press and hold in the Microphone’s [ P3
] or [
P4
] key for one second to assign the
Set Mode Item to that button.
4. Now you can recall this preferred Set Mode Item by simply pressing the
Microphone button momentarily.