32
Menu Selection Details
FTM-3200DR/DE Advance Manual
35 RPT SFT
Function:
Sets the Repeater Shift direction.
Available Values:
- RPT / + RPT / SIMPLEX
Default:
SIMPLEX
36 SCAN RSM
Function:
Selects the Scan Resume mode.
Available Values:
BUSY / HOLD / 2.0 SEC - 10.0 SEC (0.5 SEC step)
Default:
5.0 SEC
BUSY:
The scanner will hold until the signal disappears, then will resume
when the carrier drops.
HOLD:
The scanner will stop when a signal is received, and will not restart.
2.0 SEC - 10.0 SEC: The scanner will hold for the selected resume time, then resume
scanning, whether or not the other station is still transmitting.
37 SCAN SKP
Function:
Selects the Memory Scan mode.
Available Values:
SKIP/SELECT/OFF
Default:
OFF
SKIP:
The scanner will “skip” the flagged channels during scanning.
SELECT: The scanner will only scan channels that are flagged (Preferential Scan List).
OFF:
All memory channels will be scanned (the “flag” will be ignored).
38 SQL EXP
Function:
Enables/Disables the split CTCSS/DCS coding.
Available Values:
ON / OFF
Default:
OFF
When this Set Mode Item is set to “ON”, the following additional parameters are available
after the “PAGER” parameter when configuring Set Mode Item “39 SQL TYPE”:
D CODE: DCS Encode only.
T DCS: Encodes a CTCSS tone and Decodes a DCS code.
D TONE: Encodes a DCS code and Decodes a CTCSS tone.
39 SQL TYPE
Function:
Selects the Tone Encoder and/or Decoder mode.
Available Values:
TONE / TSQL / DCS / RV TONE / PAGER / OFF
Default:
OFF
TONE:
CTCSS Encoder
TSQL:
CTCSS Encoder/Decoder
DCS:
Digital Coded Encoder/Decoder
RV TONE: Reverse CTCSS Decoder (Mutes receiver when matching tone is received)
PAGER:
Enhanced Paging & Code Squelch
Note:
See also Set Mode Item “38 SQL EXP” regarding additional selections
available during “Split Tone” operation.
