18
Scanning
FTM-3200DR/DE Advance Manual
Preferential Memory Scan
The FTM-3200DR also allows setting up a “Preferential Scan List” of channels, which you
can “flag” within the memory system. The flagged channels are designated by an “ ” icon
when they are selected, one by one, for the Preferential Scan List.
When memory scanning is initiated beginning on a channel with the “ ”
icon appended
, only
those channels bearing the “ ” icon will be scanned. If scanning is initiated on a channel
which does not have the “ ” icon appended, all channels including those with the “ ” icon
appended will be scanned.
Here is the procedure for setting up and using the Preferential Scan List:
1. Set the radio to the Memory Recall mode by
pressing the [
V/M
(
MW
)] key repeatedly, as
necessary, until
“
”
and a channel number
appear on the right side of the display.
2. Rotate the
DIAL
knob to select the Memory
Channel that you wish to add to the prefer-
ential Scan List.
VOL
DIAL
SQL
TXPO
D W
M W
SETUP
REV
D/A
V / M
M H z
3. Press and hold in the [
MHz
(
SETUP
)] key for
one second, then rotate the
DIAL
knob to
select “
SCAN SKP 37
”.
VOL
DIAL
SQL
TXPO
D W
M W
SETUP
REV
D/A
V / M
M H z
4. Press the [
MHz
(
SETUP
)] key, and then ro-
tate the
DIAL
knob to select “SELECT”.
5. Press and hold in the [
MHz
(
SETUP
)] key for
one second to save the new setting and exit
to normal operation.
To initiate Preferential Memory Scanning:
1. Set the radio to the Memory Recall mode by pressing the [
V/M
(
MW
)] key repeatedly, if
necessary.
2. Rotate the
DIAL
knob to select any memory
channel which has an “ ” icon appended to
the channel number.
3. Press and hold in either the microphone [
UP
] or [
DWN
] button for one second to initiate
Preferential Memory Scanning. Only the channels which have a “ ” icon appended to
the channel number will be scanned.
