Yaesu FTM-10, Руководство по эксплуатации

Страница: 85 / 112

83 FTM-10SR O
PERATING
M
ANUAL
B
ATTERY
V
OLTAGE
D
ISPLAY
You can display the vehicle's battery voltage on the display at any time.
1. Press and hold the [
VOL/SEL
] key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “
F11 DC VOLT
”.
3. Press the key to display the vehicle’s battery voltage on the display.
4. Press the [ VOL/SEL
] key to exit Battery Voltage mode and return to normal operation.
T
EMPERATURE
D
ISPLAY
You can show the temperature inside the front panel on the display.
1. Press the [ VOL/SEL
] key repeatedly to display the Clock, Stop Watch Timer, or Ther-
mometer.
The display returns to the frequency display automatically if you leave an interval of
three seconds without entering the next operation. Please enter the next step within the
3 second interval.
2. Rotate the DIAL knob to display the temperature (TMP XX °C)
The display automatically returns to the frequency display in approximately three sec-
onds.
You may change the status that the
DIAL knob does not return automatically to the
Frequency. See the explanation of the Menu Item “
F5 AF-VFO
”.
C
LOCK
F
ORMAT
You may select the Clock Format via the Menu mode. Available selections are “HH:MM:SS”,
“HH:MM”, and “MM:SS”.
1. Press the [ VOL/SEL
] key repeatedly to display the Clock, Stop Watch Timer, or Ther-
mometer.
The display returns to the frequency display automatically if you leave an interval of
approximately three seconds before the next operation. Please operate the next step
within the 3 second interval.
2. Press and hold the [ VOL/SEL
] key for one second.
3. Rotate the DIAL knob to select the Menu Item “
T3 T FORMAT
”.
4. Press the key momentarily. Then rotate the DIAL knob to select the desired Clock
Format.
5. Press the [ VOL/SEL
] key to save the new setting and exit to normal operation.
M
ISCELLANEOUS
S
ETTING