Yaesu FTDX-9000 Contest, Руководство по эксплуатации

Страница: 33 / 56

FT
DX
9000MP/C
ONTEST
D
ATA
M
ANAGEMENT
O
PERATION
M
ANUAL
Quick Point : In the Step 2, before doing a check for a duplicate QSO, a copy is made of the QSO record, and
you may then do editing of that record. Use the [ 1/1.8
]( T ), [
2/3.5
]( S ), [
3/5
]( W ), and [
4/7
]( X ) keys to select an
item from among CALL, RST, BAND, MODE and REM; when you press [ 5/10
](
ONLY THIS
), you’ll copy only
that item. When you press [ 7/18
](
EXIT
), the TFT image changes to what you see on page 25; press [
ENTER
]
on the keyboard to do a duplicate check, and press [ ENTER
] once more to return to the log input page and
copy the data.
If you select a line of data using the [ 1/1.8
](
T
) and [
2/3.5
](
S
) keys, pressing [
6/14
](
ALL SELECT
) followed by
[
7/18
](
ENTER
) will cause the Display image to change to what you see on page 25, and you may now press the
[
ENTER
] key on the keyboard to do a duplicate check. Press [
ENTER
] once more to return to the log input page
and copy the data to that page (however, the NUMBER, RST, BAND, and MODE data will not be copied).
L
OG
B
OOK
F
UNCTION
1. Referring to Figure
c
on page 25, press the
[
2/3.5
](
T
)/[
3/5
](
S
) key to select the log data to
be Editing.
2. Now you may ue the arrow keys on your key-
board to move the highlighted area through the
log.
3. Use the keyboard to change data within the cur-
rently-highlighted area.
4. Press the [ 4/7
](
RECORD
) key when you are fin-
ished editing the entries you have worked on.
If you do not wish to save your changes, press
the [
5/10
](
UN-RECORD
) key instead.
Advice : Data may easily be deleted, if you make a
mistake, enter duplicate data accidentally, etc.
To erase data, use steps (1) and (2) to select the
data to be erased. Then press [
ESC
] on the key-
board; the data will be deleted. Press [ 4/7
](
RECORD
)
to return to the screen depicted on page 25 and end
this procedure.
Page 29
L
OG
B
OOK
P
REVIOUS
-QSO C
HECK
(
CHECK
)
IIt is possible to check the log in search for previous QSOs with a particular station. When a log entry of interest
is found, you may edit the information on that line, if you like.
1. Referring to the Figure
d
on page 25, enter the
desired callsign into the CALL field.
2. Press the [ 4/7
](
CHECK
) key to show a list of any
previous QSOs with the specified station within
the current log. Any previous QSOs will appear
on a CHECK MODE list.
3. Use the [ 1/1.8
](
T
), [
2/3.5
](
S
), [
3/5
](
W
), and [
4/
7
](
X
) keys to scroll through the data on the
CHECK MODE list.
E
DITING
L
OG
B
OOK
E
NTRIES
Previously-entered log data may be edited alter, if desired.
“ P
REVIOUS
-QSO C
HECK
” M
ODE
“ E
DITING
” M
ODE