9
Communicating with specified other station in the Analog FM mode
Selecting the Squelch Type in the Analog FM Mode
1. Press the [
F
MENU
] key
[
SQTYP
].
If [
SQTYP
] is not displayed, touch [
FWD →
] to display
[
SQTYP
] and then touch it.
2. Turn the DIAL knob and select the type of squelch, refer to the table below.
Tone squelch (CTCSS), DCS and the New PAGER (EPCS) functions do not operate in
the C4FM digital mode. Touch [MODE] to change to the Analog FM mode, or turn the
AMS function ON.
Squelch type
Icon
indication
Description
OFF
－
Deactivates the tone squelch function and DCS function
OFF, then returns to the normal squelch operation in the
Analog FM mode.
TONE
Analog FM Transmissions contain the CTCSS tone.
Receives as a normal squelch operation.
TONE SQL
Activates the CTCSS tone squelch function on Analog
FM receive.
DCS
Activates the Digital Code Squelch (DCS) function.
The DCS code may be selected from 104 codes (from
023 to 754).
REV TONE
Activates the reverse tone function.
Used to monitor communications based on the squelch
control system. When a signal contains the designated
tone, the squelch is not opened, and when the tone signal
disappears, the squelch opens, and communication starts.
PR FREQ
Activates the no-communication squelch function for
radios.
The no-communication signal tone frequencies may
be specified within the range from 300 Hz to 3000 Hz
in steps of 100 Hz.
PAGER
Activates a new two-tone CTCSS pager function.
When communicating with FT5DR/DE transceivers
among friends, specify personal codes (each code is
composed of two tones) so that only specific stations
are called.
D CD*
Transmits the signal containing the DCS CODE.
Receives as a normal squelch operation.
TONE-DCS*
Sends a tone signal when transmitting, and receives
the only signal matches the DCS code when receiving.
D CD-TONE SQL*
Sends the DCS CODE when transmitting and receives
only signals that contain a matching tone signal when
receiving.
