Yaesu FT5Dr, Руководство для продвинутых пользователей

Страница: 14 / 73

14
Receiving “pager code” calls from a Remote Station (Standby Operation)
When the Pager function is activated, and a call is received with a corresponding Code,
the audio is heard. When the PTT switch is pressed, the “ ” icon blinks and the other
station's audio is heard regardless of whether the code matches or not. About 10 seconds
after the signal disappears, the “ ” icon will light, and the sound of the unmatched
signal will not be heard.
Furthermore, when the Bell function (see below) is activated, the bell rings and the “ ” icon
blinks when receiving calls from the other station.
Using the Pager Answer Back
when called by another station with a corresponding pager code, the transceiver is auto-
matically placed in the transmit mode (for about 2.5 seconds) to notify the other station
that you are ready to communicate.
1. Activate the pager function by referring to “
Using the Pager Function ” (page 12).
2. Press the [ F
MENU
] key

[ CODE ] .
If [ CODE ] is not displayed, touch [ FWD → ] to display [ CODE ] and then touch it.
3. Press the [ F
MENU
] key, and then rotate the DIAL knob
to select “ ON ”.
6 PAGER
ANS-BACK: ON
CODE-RX : 05 47
CODE-TX : 05 47
4. Press the PTT switch to transmit a call to the specific station.
Notification of a Call from a Other Station by the Bell Function
The Bell may be set to sound an Alert when a call from another station containing a cor-
responding tone, DCS or pager code is received. “ ” icon on the display blinks to provide
a later notice of the call from the other station.
1. Press and hold the [
F
MENU
] key

touch [ SIGNALING ]

[ 1 BELL ].
2. Press the [ F
MENU
] key.
3. Rotate the DIAL knob to select “ BELL ”.
4. Press the [ BACK ] key, and then rotate the DIAL knob to
select “ RINGER ”, and then press the [ F
MENU
] key.
5. Rotate the DIAL knob to select the desired number of
times (1-20 times or continuous) the Bell rings.
• • • 1time ↔ 2times ↔ • • • ↔ 20times ↔ CONTI • • •
1 BELL
SELECT : BELL
RINGER : 1time
6. Press the PTT switch to save the setting and return to normal operation, and the “ ”
icon appears on the display.
If the setting is “CONTI” (continuous), the bell keeps sounding until an operation is made.