48
TX/RX Menu
1 MODE
1 ANTENNA ATT
If the signal from the remote station is too strong or, a strong signal exists nearby that
interferes with reception, use the attenuator (ATT) function to reduce interference.
1. Press and hold the [
F
MENU
] key
touch [
TX/RX
]
[
1 MODE
]
[
1 ANTENNA ATTN
]
2. Rotate the DIAL knob to select the desired setting.
OFF
Disable the attenuator (ATT) function OFF.
ON
Enable the attenuator (ATT) function ON.
The amount of attenuation by the attenuator (ATT) is about 10 dB.
Remark
The default setting: OFF
2 FM DEVIATION
The FM deviation can be set to half of its usual level.
Select [WIDE] for normal amateur operation.
1. Press and hold the [
F
MENU
] key
touch [
TX/RX
]
[
1 MODE
]
[
2 FM DEVIATION
]
2. Rotate the DIAL knob to select the desired setting.
WIDE
Normal FM mode (Full deviation)
NARROW
Narrow FM mode (Half deviation)
Remark
The default setting: WIDE
3 RX MODE
Manually switch to a suitable mode (radio wave type) according to the frequency band.
Press and hold the [
F
MENU
] key
touch [
TX/RX
]
[
1 MODE
] → [
3 RX MODE
].
For details, refer to “
Fixing the Communication Mode
” in the Operating Manual.
2 DIGITAL
1 DIGITAL POPUP
Set the time duration to display the remote station information such as the call sign, on
the LCD.
1. Press and hold the [
F
MENU
] key
touch [
TX/RX
]
[
2 DIGITAL
]
[
1 DIGITAL POPUP
]
2. Rotate the DIAL knob to select the desired setting.
OFF
The remote station information is not displayed.
BAND 2 s
to BAND 60 s
(seconds)
Set the time duration to display the remote station information
(2 to 60 seconds).
BAND 2 s / BAND 4 s / BAND 6 s / BAND 8 s / BAND 10 s /
BAND 20 s / BAND 30 s / BAND 60 s
BAND CONTINUE The remote station information is continuously displayed.
Remark
The default setting: BAND 10 s (seconds)
