Yaesu FT5De Скачать руководство пользователя

Страница: 28 / 80

Using the convenient Digital C4FM feature

About the Digital Group ID (DG-ID) feature

1. Digital Group ID (DG-ID) function allows communications with only the specific group

members using the two-digit ID numbers. The desired DG-ID number from 00 to 99

is set in advance by all the group members. This ID number may be set separately

for transmit and receive, when the same ID number is set for both transmit and re-

ceive, only group members with the same ID number will be heard. This feature may

be used to communicate only with group members that have the same DG-ID num-

ber. The GM function may also be utilized to automatically monitor whether or not

group member stations with the same DG-ID number are operating within communi-

cation range.

The DG-ID number 00 detects signals with all ID numbers. Normally setting the ID

number to “00” for both transmit and receive will permit reception of the signals from

all other stations using the digital C4FM mode, regardless of the transmit DG-ID

number settings of the other stations.

Also note that when the receive DG-ID number of your transceiver is set to a DG-ID

number other than “00”, received signals that do not have the same DG-ID number

may not be heard.

2. When accessing the C4FM digital repeater controlled by the DG-ID number, set the

transmit DG-ID number of the FT5DR/DE to that of the repeater input. Even in that

case, if the receive DG-ID number of the FT5DR/DE is set to “00”, all the downlink

signals from the repeater may be received.

Communicating with the DG-ID feature

•

Digital C4FM mode transceivers compatible with the DG-ID function are required in order

to utilize this function.

•

If the firmware is not compatible with the DG-ID function, update the latest firmware to use

the DG-ID function. The latest firmware is available on the YAESU website.

Setting the transmit and receive DG-ID number to “00” for communicating

with all other stations using C4FM digital mode

1. Press the [

menu

] key, and touch [

DG-ID

If [

DG-ID

] is not displayed, touch [

BACK



] to display

[

DG-ID

] and then touch it.

2. The DG-ID number setting screen will be displayed.

If the transmit DG-ID (DG-ID TX) number is not set

to “00”, press the [

menu

] key then rotate the

DIAL

knob to set “00”, and then press the [

menu

] key.

DG-ID TX : 00

DG-ID RX : 00

3. Rotate the

DIAL

knob to select the receive DG-ID

(DG-ID RX).

4. If the receive DG-ID number is not set “00”, press the

[

menu

] key then rotate the

DIAL

knob to set “00”,

and then press the [

menu

] key.

DG-ID TX : 00

DG-ID RX : 00

5. Press the [

BACK

] key or the

PTT

switch to save the setting and return to the normal

operation.

The setting is complete.

Содержание FT5De

















































































Результаты поиска

Содержание FT5De

Отзывы:

Похожие инструкции для FT5De

Бренды по названию

Популярные бренды

Yaesu FT5De, Руководство по эксплуатации

Результаты поиска

Содержание FT5De

Отзывы:

Похожие инструкции для FT5De

Бренды по названию

Популярные бренды