Yaesu FT5De Скачать руководство пользователя

Страница: 26 / 80

Fixing the Communication Mode

To fix the transmission mode for operation, touch [

MODE

]

to switch the communication mode.

Communication Mode

Icon

Description of Modes

V/D Mode

(

Voice/Data simultaneous transmission mode)

This is the standard digital mode.

Calls are less prone to interruptions caused by detec-

tion and correction of the received digital voice signal.

Voice FR Mode*

(Voice Full Rate Mode)

High speed data communication using entire 12.5 kHz

band.

Enables high-quality voice communication.

FM Mode

Analog communication using FM mode.

AM Mode (receive only)*

The AM mode for receive only.

Data FR Mode

(High speed data Communication Mode)

High speed data communication mode using the entire

12.5 kHz bandwidth for data communication. Automati-

cally switches to this mode during image transmission.

1 When the Setup Menu [

TX/RX

]



[

2 DIGITAL

]



[

4 DIGITAL VW

] is set to “

”

(factory default is “OFF”), the Voice FR mode (VW) may be selected.

*2 When the Setup Menu [

TX/RX

]



[

1 MODE

]



[

3 RX MODE

] is set to “

AUTO

”

(factory default setting), AM mode is automatically selected within the AIR band (108

- 136.995 MHz).

Transmission

1. While pressing and holding the

PTT

switch, speak

into the microphone.

The TX/BUSY indicator will glow red during transmis-

sion.

If the PTT switch is pressed when a frequency other than

the amateur ham radio band is selected, an alarm tone

(beep) will be emitted and “TX INHIBIT” appears on the

LCD, disabling transmission.

2. Release the

PTT

switch to return to receive mode.

When receiving a signal, the TX/BUSY Indicator

lights according to the receive mode.

Receive Band

TX/BUSY LED

C4FM receiving

Blue

Analog FM receiving

Green

TX/BUSY LED

The TX / BUSY LED blinks while receiving a signal that does not match the DG-ID or

similar tones, and when the sub-band audio is muted with the sub-band mute feature.

If transmission is continued for a long period, the transceiver overheats and the high

temperature protection function is activated. As a result, the transmitting power level is

automatically set to Low Power. If transmission continues while the high temperature

protection function is active, the transceiver will be forcibly returned to the receive mode.

Содержание FT5De

















































































Результаты поиска

Содержание FT5De

Отзывы:

Похожие инструкции для FT5De

Бренды по названию

Популярные бренды

Yaesu FT5De, Руководство по эксплуатации

Результаты поиска

Содержание FT5De

Отзывы:

Похожие инструкции для FT5De

Бренды по названию

Популярные бренды