![background image](http://html1.mh-extra.com/html/yaesu/ft2de/ft2de_technical-supplement_892914016.webp)
FT2DR/DE Technical Supplement
Alignment
ALIGNMENT-11
Squelch Threshold Adjustment (THLD SQL)
Connect the test equipment as shown in Figure 2:
RX Alignment Setup.
Rotate the
DIAL
knob to select the Alignment
Menu "
THLD SQL
".
Set the RF Signal Generator output to 145.100
MHz, at a level of -11 dBμ, ±3.5 kHz deviation
with a 1 kHz audio tone.
Press the [
V/M
] button (the "Data" will appear
on the display).
Press the [
X
] key two times to store the Squelch
Threshold level.
Press the [
V/M
] button (the "Data" will disap-
pear on the display).
Tight Squelch Adjustment (TIGH SQL)
Connect the test equipment as shown in Figure 2:
RX Alignment Setup.
Rotate the
DIAL
knob to select the Alignment
Menu "
TIGH SQL
".
Set the RF Signal Generator output to 145.100
MHz, at a level of -4 dBμ, ±3.5 kHz deviation
with a 1 kHz audio tone.
Press the [
V/M
] button (the "Data" will appear
on the display).
Press the [
X
] key two times to store the Squelch
Tight level.
Press the [
V/M
] button (the "Data" will disap-
pear on the display).
FM S-Meter S-1 Adjustment (S1 LEVEL)
Connect the test equipment as shown in Figure 2:
RX Alignment Setup.
Rotate the
DIAL
knob to select the Alignment
Menu "
S1 LEVEL
".
Set the RF Signal Generator output to 145.100
MHz, at a level of -7 dBμ, ±3.5 kHz deviation
with a 1 kHz audio tone.
Press the [
V/M
] button (the "Data" will appear
on the display).
Press the [
X
] key two times to store the FM
S-Meter S-1 level.
Press the [
V/M
] button (the "Data" will disap-
pear on the display).
FM S-Meter Full-Scale Adjustment (S9 LEVEL)
Connect the test equipment as shown in Figure 2:
RX Alignment Setup.
Rotate the
DIAL
knob to select the Alignment
Menu "
S9 LEVEL
".
Set the RF Signal Generator output to 145.100
MHz, at a level of +20 dBμ, ±3.5 kHz deviation
with a 1 kHz audio tone.
Press the [
V/M
] button (the "Data" will appear
on the display).
Press the [
X
] key two times to store the FM
S-Meter Full Scale level.
Press the [
V/M
] button (the "Data" will disap-
pear on the display).
This completes the internal alignment routine
for all bands. To save all settings and exit, touch
[
WRITE
].
Содержание FT2DE
